Home Forums Algemeen Genua slede’s vervangen. Reageer op: Genua slede’s vervangen.

Michiel Veldkamp
Deelnemer
Aantal berichten: 132

Hermen,

Ik zelf heb genuasledes van Pfeifer waarin blok en slede een geheel vormen, je kan ook sledes met los blok gebruiken.

De North Sails Tuning guide geeft deze plek en lengte aan voor de genuarails in het gangboord:

INNER GENOA TRACKS
The genoa has a flat leech section that allows us to sheet the genoa on an inner track in all conditions. The position of the track is 100 to 150 mm inboard of the standard track. The aft end of the track is 600 mm forward of the cut-out in the gunwale. The track is 500 mm long. Because of the low clew of the genoa it is important to have the spacing of the trim positions tight enough. Drilling an extra hole between factory holes, bringing the spacing down to about 50 mm will do the job.

Met de cut-out of the gunwale wordt de afwatering van het gangboord bedoeld. Er is wel een tekeningetje van maar dat moet ik even opzoeken.